Antelope Audio premiered three products at the recent NAMM Show in Southern California: the Edge Go modeling microphone, and the Orion32+ | Gen 3 and Orion32 HD | Gen 3 audio interfaces.
Edge Go is so much more than just another USB microphone. Connected via USB-C and equipped with a 3.5mm headphone jack for real-time monitoring, Edge Go achieves an entire processed vocal chain at the hardware level all in real-time. With a variety of high-end condenser mic models and a special selection of lifelike vintage compressor and EQ effects, plus built-in de-essing, gating/expansion, tape saturation, and reverb all controlled by an intuitive PC/Mac app, getting fully-finished recordings on the go has never been simpler. A collection of channel strip presets, crafted by industry pros, makes it even easier to quickly achieve a sound that’s ready for radio, podcast, Twitch stream, or album. And it all comes straight off the Edge Go, with practically imperceptible latency.
Edge Go Features:
- Studio-grade large-diaphragm condenser microphone
- Bus-powered over USB-C (USB Type-A compatible)
- Accurately models the world’s finest studio condenser microphones
- Switchable polar patterns (cardioid, figure 8, omni, and everything in between)
- Latency-free monitoring and recording with onboard effects processing
- High-end A/D conversion (24-bit / 192kHz)
- Full frequency response: 20Hz - 20kHz
- 3.5mm headphone jack for monitoring
- Easy and intuitive software control panel
- Presets by top studio professionals
The Orion32+ | Gen 3 brings the same connectivity, flexibility, and channel counts to the production table that the original Orion32+ made its name with. But there’s even more to it now: elevated operating levels (+24dBu max), upgraded AD/DA conversion, ultra-fast and stable custom ThunderboltTM driver for Windows, and a major facelift. It will be available with a selection of real-time, FPGA-powered effects from the Antelope Audio collection.
Orion32+ | Gen 3 Features:
- Cutting-edge AD/DA converters with up to 129dB dynamic range
- FPGA-powered real-time FX models of iconic studio gear
- Compatible with AFX2DAW software bridge
- Ultra-fast and stable proprietary ThunderboltTM driver for Windows
- Sub-millisecond latency at 96-192kHz / 32-64 samples
- 64 channels of 24-bit, 192 kHz audio via ThunderboltTM
- 32 channels of 24-bit, 192 kHz audio via USB
- MADI, ADAT, S/PDIF, 8x DB25 digital connectivity
- Next-generation 64-bit clocking and jitter management
- 10 MHz input enables connection to 10M and 10MX atomic clocks
- Word Clock outputs for use as master clock
- Networking control from multiple computers
- Flexible routing, mixing, and effects chaining via macOS and Windows app
- Freely movable and resizable control panels for multi-screen workflows
- Facelift for 2019 — gorgeous Carbon Grey faceplate
The original Orion32 HD set a new price/performance standard for HDX-compatible I/O. Industry-leading conversion and exceptional connectivity for the price ensure expectations are redefined once again with the Orion32 HD | Gen 3. Indeed, it includes all the power of the original, now upgraded with Antelope Audio’s flagship-level AD/DA conversion. In fact, its MONITOR output pair has been measured at a phenomenal 136dB dynamic range — an industry-leading specification! With cutting-edge conversion, a refreshed design, and a wide range of real-time, FPGA-powered effects, the Orion32 HD | Gen 3 will make productions and live shows shine like nothing else on the market when it starts shipping.
Orion32 HD | Gen 3 Features:
- Pro Tools HD- and Native-compatible 64x64 AD/DA converter
- Industry-leading AD/DA conversion with up to 136dB dynamic range
- 38 FPGA-powered real-time FX models of iconic studio gear
- Streaming of 24-bit, 192 kHz audio via HDX or USB 3.0
- Next-generation 64-bit clocking and jitter management
- 10 MHz input enables connection to 10M and 10MX atomic clocks
- Word Clock outputs for use as master clock
- Additional connectivity on MADI, ADAT, S/PDIF, 8x DB25
- Mastering-grade monitor outputs
- Housed in efficient ‘green design’ fan-less chassis
- Networking control from multiple computers
- Flexible routing, mixing, and effects chaining via macOS and Windows app
- Freely movable and resizable control panels for multi-screen workflows
- Facelift for 2019 — beautiful Black faceplate
Edge Go, Orion32+ | Gen 3, and Orion32 HD | Gen 3 are all expected to start shipping in Q1 2019 with estimated retail prices of $1,595.00 USD, $2,595.00 USD, and $3,995.00 USD, respectively. Note that the Edge Go package includes the modeling microphone itself, a rock-solid desktop mic stand, a pro-grade pop filter, an amazing custom shock mount, a USB-C cable, and a hard shell carrying case.
More at www.antelopeaudio.com.